Posted by Robert Novak on July 19, 1999 at 21:30:49:
In Reply to: Re: ingnition coil----- very urgent!!!! posted by Tim Schroeder on July 19, 1999 at 21:18:50:
Motor going just fine.No start problem.I don't know is this normall or is't.I have some manual with elecrtical system.And I still dont understand what
is the problem.When engine is runing everything is OK.But,when is not runing
in the situation I described
(ingnition lock is ON,red switch is RUN) upper wire starts to heating very
much.When I check voltage I get 12V on lower wire and 2.2V on the upper
wire.
Then I start the engine and have 12V on both wires, and heatings
stop.(engine is cold).
Can YOU try this on your byke.Just put ingnition lock in position ON, red
switch in position RUN and tuch upper wire on the ingnition coil.Is it